Command Summary
Keysight 3458A Quick Reference Guide 21
Keysight 3458A Quick Reference Guide 21
DELAY [time]
Specifies a time interval that is inserted between
the trigger event and the first sample event (or
when sub-sampling, between the sync source
event and the first reading of each burst).
time: Specifies the delay time in seconds. Delay
time can range from 1 E-7 (100 ns) to 6000
seconds in 100 ns increments. Specifying 0 for the
delay sets the delay to its minimum possible
value.
Power-on time = automatic (determined by
function, range, resolution, and ACBAND setting).
Default time = automatic (determined by
function, range, resolution, and ACBAND setting).
DELSUB name
Delete Subprogram. Removes a single
subprogram from memory.
name: A subprogram name may contain up to 10
characters. The name can be alpha,
alphanumeric, or an integer in the range of 0 to
127.
Power-on name = none.
Default name = none: parameter required.
DIAGNOST
Refer to the Keysight 3458A Assembly Level
Repair Manual.
To Next Page
Loading...
