Keysight 3458A - Command Summary; ACAL [type][,security_code]; ACBAND [low_freq][,high_freq]

Command Summary
14 Keysight 3458A Quick Reference Guide
14 Keysight 3458A Quick Reference Guide
Command Summary
In the following command summary, command
keywords are shown in upper case print and
parameter names are shown in italics. Optional
parameters are enclosed in square brackets ( [ ] ).
Where applicable, the numeric query equivalents
for parameters are shown in parentheses
following each parameter.
ACAL [type][,security_code]
Autocal. Instructs the multimeter to perform one
or all of its self calibrations.
type = ALL (0), DCV (1), AC (2), OHMS (4)
Power-on type = none.
Default type = ALL.
ACBAND [low_freq][,high_freq]
AC Band wid th. Specifies the frequency content
(bandwidth) of the input signal for all AC or
AC+DC measurements.
low_freq Specifies the lowest expected frequency
component of the input signal.
Power-on low_freq = 20 Hz
Default low_freq = 20 Hz
high_freq: Specifies the highest expected
frequency component of the input signal.
Power-on high_freq = 2 MHz
Default high_freq = 2 MHz