Command Summary
40 Keysight 3458A Quick Reference Guide
40 Keysight 3458A Quick Reference Guide
QFORMAT [type]
Query Format. Designates whether query
responses contain numeric or alpha characters
(whenever possible), and whether command
headers are returned.
type = NUM (0), NORM (1), ALPHA
Power-on type = NORM.
Default type = NORM.
R [max._input][,%_resolution]
R is an abbreviation for the RANGE command.
Refer to the RANGE command for more
information.
RANGE [max._input][,%_resolution]
Selects a measurement range or the autorange
mode.
max._input: Selects a fixed range or the
autorange mode. To select a fixed range, specify
the absolute value (no negative numbers) of the
maximum expected amplitude of the input signal.
The multimeter then selects the correct range. To
select autorange, specify AUTO or default the
parameter.
The following tables show the max._input
parameters and the ranges they select for each
measurement function.
To Next Page
Loading...
