Command Summary
Keysight 3458A Quick Reference Guide 39
Keysight 3458A Quick Reference Guide 39
OFORMAT DINT
TARM SYN
TRIG AUTO
PRESET DIG configures the multimeter for DCV
digitizing. Executing PRESET DIG executes the
commands shown under PRESET NORM with the
following exceptions:
DCV 10
AZERO OFF
DISP OFF
TARM HOLD
TRIG LEVEL
LEVEL 0,AC
NRDGS 256,TIMER
TIMER 20E-6
APER 3E-6
MFORMAT SINT
OFORMAT SINT
PURGE name
Purge State. Removes a single stored state from
memory.
name: A state name may contain up to 10
characters. The name can be alpha,
alphanumeric, or an integer in the range of 0 to
127.
Power-on name = none.
Default name = none: parameter required.
To Next Page
Loading...
