Power-On/Reset State
Keysight 3458A Quick Reference Guide 11
Keysight 3458A Quick Reference Guide 11
Power-On/Reset State
The following list shows the commands executed
when power is applied or when the RESET
command is executed.
ACBAND 20,2E6 -- AC bandwidth 20 Hz to
2 MHz
AZERO ON -- Autozero enabled
DCV AUTO -- DC voltage, autorange
DEFEAT OFF -- Defeat disabled
DELAY -1 -- Default delay
DISP ON -- Display enabled
EMASK 32767 -- Enable all error conditions
END OFF -- Disable GPIB EOI
EXTOUT ICOMP,NEG -- Input complete
EXTOUT signal, negative pulse
FIXEDZ OFF -- Disable fixed input resistance
FSOURCE ACV -- FREQ and PER source is AC
voltage
INBUF OFF -- Disable input buffer
LEVEL 0,AC -- Level trigger at 0%, AC-coupled
LFILTER OFF -- Level filter disabled
LFREQ 50 or 60 -- Measured line frequency
rounded to 50 or 60 Hz
LOCK OFF -- Keyboard enabled
MATH OFF -- Disable real-time math
MEM OFF -- Disable reading memory (last
memory operation= FIFO)
MFORMAT SREAL -- Single real reading memory
format
To Next Page
Loading...
