Keysight 3458A - Page 12

Power-On/Reset State
12 Keysight 3458A Quick Reference Guide
12 Keysight 3458A Quick Reference Guide
MMATH OFF -- Disable post-process math
NDIG 7 -- Display 7.5 digits
NPLC 10 -- 10 power line cycles of integration
time
NRDGS 1,AUTO -- 1 reading per trigger, auto
sample event
OCOMP OFF -- Disable offset compensated
resistance
OFORMAT ASCII -- ASCII output format
QFORMAT NORM -- Normal query format
RATIO OFF -- Disable ratio measurements
RQS 0 -- Disable Status Register conditions
SETACV ANA -- Analog AC voltage mode
SLOPE POS, -- Positive slope for level triggering
SSRC LEVEL, AUTO -- Level sync source event,
auto synchronous AC voltage
SWEEP 100E-9, 1024 -- Sample interval
100 nanoseconds, 1024 samples
TARM AUTO -- Auto trigger arm event
TBUFF OFF -- Disable external trigger buffering
TIMER 1 -- 1 second timer interval
TRIG AUTO -- Auto trigger event