Command Summary
46 Keysight 3458A Quick Reference Guide
46 Keysight 3458A Quick Reference Guide
REV?
Revision Query. Returns two numbers separated
by a comma. The first number is the multimeter's
master processor firmware revision. The second
number is the slave processor firmware revision.
RMATH [register]
Recall Math. Reads and returns the contents of a
math register.
register = DEGREE (1), LOWER (2), MAX (3),
MEAN (4), MIN (5), NSAMP (6), OFFSET (7),
PERC (8), REF (9), RES (10), SCALE (11),
SDEV (12), UPPER (13), HIRES (14),
PFAILNUM (15)
Power-on register = none.
Default register = DEGREE.
RMEM [first][,count][,record]
Recall Memory. Reads and returns the value of a
reading or group of readings stored in reading
memory. RMEM leaves stored readings intact (not
cleared from memory).
first: Designates the beginning reading.
Power-on first = none.
Default first = 1
count: Designates the number of readings to be
recalled, starting with first.
Power-on count = none.
Default count = 1
To Next Page
Loading...
