Command Summary
28 Keysight 3458A Quick Reference Guide
28 Keysight 3458A Quick Reference Guide
%_resolution: Specifies resolution as a a
percentage of the max._input parameter. (Refer
to the FREQ and PER commands for tables
showing how %_resolution affects frequency and
period measurements: %_resolution is ignored
when the function parameter is DSAC, DSDC,
SSAC, or SSDC.)
Power-on %_resolution = none.
Default %_resolution:
FREQ or PER =.00001 (gate time=1s, 7 digits
resolution).
SETACV SYNC = 0.01%
SETACV RNDM = 0.4%
For all other measurement functions, the default
resolution is determined by the present
integration time.
ID?
Identity Query. Causes the multimeter to send
the string “Keysight 3458A”.
INBUF [control]
Input Buffer. Enables or disables the multimeter's
input buffer. When enabled, the input buffer
temporarily stores the commands it receives over
the GPIB bus. This releases the bus immediately
after a command is received, allowing the
controller to perform other tasks while the
multimeter executes the stored command.
control = OFF (0), ON (1)
Power-on control = OFF.
To Next Page
Loading...
