Keysight E5071C ENA Series User Manual

48 Keysight E5071C ENA Series RF Network Analyzers
Troubleshooting
System Recovery
3-
Step 6. Select Restore.
Figure 3-10 Activate Acronis Startup Recovery Manager
Step 7. A confirmation dialog box is displayed. Push the enter to select Yes to start
the recovery of the factory backup. The recovery takes a few minutes
depending on the amount of data.
Figure 3-11 Recover Factory Backup
e5071cse1079
e5071cse1034

Keysight E5071C ENA Series Specifications

General

Number of Ports	2 or 4
Dynamic Range	>123 dB (typical)
Connectivity	LAN, USB, GPIB
Display	10.4-inch LCD
Trace Noise	0.004 dB rms
Impedance	50 Ohm
Weight	20 kg
Dimensions	426 mm × 177 mm × 407 mm