Keysight E5071C ENA Series RF Network Analyzers 49
Troubleshooting
System Recovery
Step 8. When the recovery is finished, push the enter select OK. The E5071C restarts
automatically.
Step 9. After restart, the screen for initial registration appears. Execute initial
registration. For information on the execution procedure, refer to “Windows
Vista Business (HDD Revision: CN924 or below)” on page 36.
Step 10. Execute the calibration of the touch screen.
Never turn off the power during the system recovery because doing so
may cause serious damage to the E5071C.
To Next Page
Loading...
