Keysight N9041B - Page 1628

3 Spectrum Analyzer Mode
3.9 SEM Measurement
Notes OFFSet1 is for BTS, 2 for MS. Default is BTS
Preset
ETOCenter
State Saved Saved in instrument state
Range Carrier Center to Meas BW Center|Carrier Center to Meas BW Edge|Carrier Edge to Meas BW Center-
|Carrier Edge to Meas BW Edge|RF BW Edge to Meas BW Center|RF BW Edge to Meas BW Edge|RF BW
Center to Meas BW Center
Diagrams for Offset Freq Define
Details depend on the selected mode.
Diagrams for Modes other than MSR, LTEAFDD/LTEATDD, 5G NR
1628 Spectrum Analyzer Mode User's &Programmer's Reference