9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
–
"Questionable Temperature Event Query" on page 2802
–
"Questionable Temperature Negative Transition" on page 2802
–
"Questionable Temperature Positive Transition" on page 2802
Questionable Temperature Condition
Returns the decimal value of the sum of the bits in the Questionable Temperature
Condition register.
NOTE
The data in this register is continuously updated and reflects the current
conditions.
Remote Command
:STATus:QUEStionable:TEMPerature:CONDition?
Example
:STAT:QUES:TEMP:COND?
Preset 0
Status Bits/OPC depend-
encies
Sequential command
Questionable Temperature Enable
Determines which bits in the "Questionable Temperature Condition" on page 2801
Register will set bits in the "Questionable Temperature Event Query" on page 2802
register, which also sets the Temperature Summary bit (bit 4) in the "Questionable
Register" on page 2794.
The variable <integer> is the sum of the decimal values of the bits you want to
enable.
Remote
Command
:STATus:QUEStionable:TEMPerature:ENABle <integer>
:STATus:QUEStionable:TEMPerature:ENABle?
Example
:STAT:QUES:TEMP:ENAB 2
Instrument Overheated will be reported to the Temperature Summary of the Questionable Register
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
2801 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
