Keysight N9041B - 7.2.14.4 Set Default Directory (Remote Command Only); 7.2.14.5 Query ARB Memory File List (Remote Query Only); 7.2.14.6 Query ARB Memory Full File List (Remote Query Only)

7 Save/Recall/Print
7.2 Recall
7.2.14.4 Set Default Directory (Remote Command Only)
Sets the default directory for loading ARB files from SCPI.
Remote
Command
:SOURce:RADio:ARB:DEFault:DIRectory <string>
:SOURce:RADio:ARB:DEFault:DIRectory?
Example
:SOUR:RAD:ARB:DEF:DIR "D:\ArbFiles"
:SOUR:RAD:ARB:DEF:DIR?
Notes Sets the default directory to be used as a search location for waveform segments that are required to be
loaded into ARB memory for playback of a waveform sequence, and as a search location for selecting
waveforms using SCPI
State Saved Persistent, survives a power cycle and a preset but not saved in the instrument state
7.2.14.5 Query ARB Memory File List (Remote Query Only)
Queries the instrument for the list of waveform segments in the ARB memory.
NOTE
Returns a string for waveform segment names in ARB memory. If you want a
string list of waveform segments in the ARB memory, use "Query ARB Memory
Full File List (Remote Query Only)" on page 2549.
Remote Command
:SOURce:RADio:ARB:CATalog?
Example
:SOUR:RAD:ARB:CATalog?
Notes The return data is in the following format:
<integer>
memory used
<integer>
memory free
<string>…
comma separated list of waveform segments within ARB memory
7.2.14.6 Query ARB Memory Full File List (Remote Query Only)
Queries the instrument for the string list of waveform segments in the ARB memory.
Returns a string list for waveform segment names in the ARB memory.
Remote
Command
:SOURce:RADio:ARB:FCATalog?
Example
:SOUR:RAD:ARB:FCATalog?
Notes The return data is in the following format:
2549 Spectrum Analyzer Mode User's &Programmer's Reference