Keysight TS-5020 - Test System Interface Description; Test System Interface Connectors

3-6 TS-5020 Automotive Electronics Functional Test System Wiring Guide and Hardware Reference
3 System Overview
Test System Interface Description
The Keysight TS-5020 Test System Interface provides a common
connection interface between the test stand and your test
fixture/Unit Under Test (UUT). The Test System Interface
provides flexibility for specific test requirements and is
pre-wired and integrated to test stand equipment,
Test System Interface Connectors
There two types of Test system Interface Connectors;
• Express Connect
• Macpanel L2000 (TITAN)
Express Connect Test System Interface
The Express Connect Test System Interface can contain either
of the following sets of test connectors:
• TC1 through TC4
• TC1 through TC8
Test connectors TC1 to TC4 or TC1 to TC8 provide the majority
of the connections to the UUT.
These connectors are 156-pin, ITT Cannon Zero-Insertion-Force
connectors.
Figure 3-1 and Figure 3-2 show the outline of the connector
sets.