System Interconnects 4
TS-5020 Automotive Electronics Functional Test System Wiring Guide and Hardware Reference 4-7
ESD Protection Measures
In geographic areas where ESD (electro-static discharge)
potential may be high (low humidity, etc.), you may need to add
a grounding strap to the center shafts of the Test Connector
mating connector assembly.
Figure 4-6 shows how to add the
grounding strap. Positions J1 through J6 are safety ground
connections on the Test Connector.
Figure 4-6 Adding A Grounding Strap To Reduce ESD
To Next Page
