Keysight U1610A - Saving the Recorded Data; Erasing the Saved Recorded Data; Transferring the Saved Recorded Data

Using the Data Logger 5
Keysight U1610/20A User’s Guide 105
Saving the recorded data
When the logger is stopped, press to select either the USB storage
device or internal memory as the storage location. Press and use the
keys to select the USB location or the internal memory slot to save the
recorded data to. Ensure that your USB storage device is connected and ready for
use (see “Select the save location” on page 86).
Press to save the recorded data.
Erasing the saved recorded data
When the logger is stopped, press repeatedly to select the erase
function. Press and use the keys to select the internal memory
slot to be erased.
Press to erase the recorded data in the selected memory slot.
Transferring the saved recorded data
When the logger is stopped, press repeatedly to select the transfer
function. Press and use the keys to select the internal memory
slot to be transferred to the USB storage device. The USB location will be the
previous location selected.
Press to transfer the selected recorded data to the USB storage
device.