4 Using the Digital Multimeter
94 Keysight U1610/20A User’s Guide
2 Read the voltage reading from the display.
3 See "Relative Measurement", "Range", and "Restart Measurements" for the
respective functions.
Resistance Measurement
Resistance (Ω) is measured by sending a small current out through the test leads
to the device or circuit-under-test.
To measure resistance:
1 Press and use the keys to select the resistance
measurement function. Set up the following connections:
Disconnect power to the device-under-test and discharge all high voltage
capacitors to avoid electric shock and damage to the handheld scope or
device-under-test while taking resistance measurement.
To Next Page
Loading...
