3 Using the Oscilloscope
66 Keysight U1610/20A User’s Guide
Display Controls
Press to access the display control menu.
Figure 3-8 Display control menu
Vectors display
Toggle to enable the vectors mode, which draws a line between
consecutive waveform data points. This mode produces the most insightful
waveforms for most situations.
Sin x/x interpolation
Toggle to enable sin x/x interpolation, which reproduces the exact
waveform as displayed on the oscilloscope. You can use this process to reaffirm
the behavior of a signal between samples.
To Next Page
Loading...
