3 Using the Oscilloscope
86 Keysight U1610/20A User’s Guide
Save control
Press to access the save functions.
Figure 3-13 Save submenu
Select the save file format
Press repeatedly to select the file format to save. The waveform trace
and setup is saved to the handheld scope internal memory, while the rest of the
formats are saved to a connected USB storage device.
– Trace & Setup – save the waveform image and setup file.
– csv data – save the data points in the CSV format.
– bmp (8-bit) – save the waveform image in the BMP (8-bit) format.
– bmp (24-bit) – save the waveform image in the BMP (24-bit) format.
– png (24-bit) – save the waveform image in the PNG (24-bit) format.
– RAW – save the waveform image in the raw format.
Select the save location
Press and use the keys to select any of the internal memory
slots (for the trace and setup format) or any location in your connected USB
storage device (for other file formats) to save to.
To Next Page
Loading...
