3 Using the Oscilloscope
56 Keysight U1610/20A User’s Guide
Glitch trigger
A glitch is a rapid change in the waveform that is usually narrow as compared to
the waveform. The Peak Detect mode can be used to more easily view glitches or
narrow pulses.
Source
See “Source” on page 55.
Polarity
Toggle to select the positive ( ) polarity or negative ( ) polarity for
the glitch you want to capture.
Level
See “Level” on page 55.
Qualifier
The time qualifier sets the oscilloscope to trigger on a channel pattern whose time
duration is:
– less than a time value (<)
– greater than a time value (>)
– within a range of time values (><)
– outside a range of time values (<>)
To select the qualifier:
1 Press to access more trigger parameters.
2 Press repeatedly.
Minimum and Maximum values
Press > / and use the or key to set the
minimum or maximum time value respectively for the selected qualifier.
To Next Page
Loading...
