3 Using the Oscilloscope
64 Keysight U1610/20A User’s Guide
Waveform Acquisition Controls
The real-time sampling of the handheld scope can be used with either repetitive
signals or single-shot signals. This means the waveform display is produced from
samples collected during one trigger event and all samples from previous trigger
events are erased.
Press to access the acquisition mode menu.
Figure 3-7 Acquire menu
–Normal mode
Used for most waveforms with normal decimating and no averaging. This
mode provides the best display for most waveforms. You are allowed to
capture up to 1.2 kpts of data in the CSV format.
– Peak Detect mode
Evaluates all sample points at the maximum sample rate, selects the minimum
and maximum points, and stores them into memory. This ensures that narrow
glitches will always be displayed regardless of sweep speed. You are allowed
to capture up to 1.2 kpts of data in the CSV format.
To Next Page
Loading...
