3 Using the Oscilloscope
82 Keysight U1610/20A User’s Guide
Autoscale and Run/Stop Controls
Autoscale
Pressing automatically configures the handheld scope to best display
the input signals by analyzing any waveforms present at each channel and at the
external trigger input.
Figure 3-11 Autoscale function menu
Undo autoscale
Press to return to the settings that existed before pressing .
This is useful if you have unintentionally pressed or do not like the
settings Autoscale has selected and want to return to your previous settings.
Select the autoscale mode
Toggle to select between the auto or manual range mode to apply on
the waveforms.
To Next Page
Loading...
