Keysight U1610A Service Manual

Keysight U1610/20A Service Guide 9
Environmental Conditions
This instrument is designed for indoor use and in an area with low condensation.
The table below shows the general environmental requirements for this
instrument.
Environmental condition Requirement
Temperature
Operating:
– 0 °C to 50 °C (with battery only)
– 0 °C to 40 °C (with AC/DC adapter)
Storage: –20 °C to 70 °C
Humidity
Operating:
– Maximum: 80% RH at 40 °C (non-condensing)
– Minimum: 50% RH at 40 °C (non-condensing)
Storage: Up to 95% RH at 40 °C (non-condensing)
NOTE
The U1610/20A Handheld Digital Oscilloscope complies with the following
safety and EMC requirements:
– IEC 61010-1:2001/EN 61010-1:2001
– Canada: CAN/CSA-C22.2 No. 61010-1-04
– USA: ANSI/UL 61010-1:2004
– IEC 61326-1:2005/EN 61326-1:2006
– Australia/New Zealand: AS/NZS CISPR 11:2004
– Canada: ICES/NMB-001: ISSUE 4, June 2006

Keysight U1610A Specifications

General

Brand	Keysight
Model	U1610A
Category	Test Equipment
Language	English