Keysight x-series Measurement Guide

11
Getting Started with the Spectrum Analyzer Measurement Application
1 Getting Started with the Spectrum Analyzer
Measurement Application
This chapter provides some basic information about using the Spectrum Analyzer
and IQ Analyzer Measurement Application Modes. It includes topics on:
• “Making a Basic Measurement” on page 12
• “Recommended Test Equipment” on page 17
• “Accessories Available” on page 18
Technical
Documentation
Summary:
Your Signal Analysis measurement platform:
Getting Started Turn on process, Windows XP use/configuration, Front and rear panel
Specifications Specifications for all available Measurement Applications and optional hardware
(for example, Spectrum Analyzer and W-CDMA)
Functional Testing Quick checks to verify overall instrument operation.
Instrument Messages Descriptions of displayed messages of Information, Warnings and Errors
Measurement Application specific documentation:
(for example, Spectrum Analyzer Measurement Application or W-CDMA Measurement Application)
Measurement Guide Examples of measurements made using the front panel keys or over a remote
interface.
User’s/Programmer’s
Reference
Descriptions of front panel key functionality and the corresponding SCPI
commands. May also include some concept information.

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)