Keysight x-series Measurement Guide

17
Getting Started with the Spectrum Analyzer Measurement Application
Recommended Test Equipment
Recommended Test Equipment
The following table list the test equipment you will need to perform the example
measurements describe in this manual.
NOTE To find descriptions of specific analyzer functions, for the N9060A Spectrum
Analyzer Measurement Application, refer to the Keysight Technologies X-Series
User’s and Programmer’s Reference.
Test Equipment Specifications Recommended Model
Signal Sources
Signal Generator (2) 0.25 MHz to 4.0 GHz
Ext Ref Input
E443XB series or E4438C
Adapters
Type-N (m) to BNC (f) (6) 1250-0780
Cables
BNC, 122 cm (48 in) (3) 10503A
Miscellaneous
Directional Bridge 86205A

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)