13
4
4
Features of your vehicle Keys
Theft-alarm system (if equipped)
Theft-alarm system is designed to
provide protection from
unauthorised entry into the vehicle.
Vehicles equipped with a theft alarm
system will have a label attached to
the vehicle with the following words:
1. WARNING
2. SECURITY SYSTEM
This system is operated in three
stages:
䳜 Armed stage
䳜 Theft-alarm stage
䳜 Disarmed stage
If triggered, the system provides an
audible alarm with blinking of the
hazard warning lights.
Armed stage
Theft Alarm System goes to Armed
stage after 30 seconds from the
doors are locked by switch on a Out
-
side Door Handle/by a lock button
on the Key.
Using the smart key
Park the vehicle and stop the
engine. Arm the system as
described below.
1. Turn off the engine.
2. Make sure that all doors (and tail
-
gate) and the engine bonnet are
closed and latched.
3. Do one of the following:
䳜 Lock the doors by pressing the
button of the front outside
door handle with the smart key
in your possession. After com
-
pletion of the steps above, the
hazard warning lights operate
once to indicate that the sys
-
tem is armed. If any door
remains open, the doors won't
lock and the chime will sound
for 3 seconds. Close the door
and try again to lock the doors.
If tailgate or engine bonnet
remains open, the hazard
warning lights won't operate
and theft-alarm will not arm.
After this, if the tailgate and
engine bonnet are closed, the
hazard warning lights will blink
once.