43
3
3
Safety features of your vehicle ISOFIX anchorage and top-tether anchorage
(ISOFIX anchorage system) for children
attachment to come loose or
break.
䳜 Do not attach the top-tether to
anything other than the correct
top-tether anchorage. It may not
work properly if attached to
something else.
䳜 Child Restraint System anchor
-
ages are designed to withstand
only those loads imposed by cor
-
rectly fitted Child Restraint Sys
-
tem.
Under no circumstances are they
to be used for adult seat belts or
harnesses or for attaching other
items or equipment to the vehicle.
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system,
all Child Restraint Systems must be
secured to a rear seat with the lap
part of a lap/shoulder belt.
To install a Child Restraint System
on the rear seats, do the following:
1. Place the Child Restraint System
on a rear seat and route the lap/
shoulder belt around or through
the Child Restraint System, fol
-
lowing the Child Restraint Sys
-
tem manufacturer's instructions.
Make sure the seat belt webbing
is not twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis
-
tinct "click" sound. Position the
release button so that it is easy to
access in case of an emergency.
3. Remove as much slack from the
belt as possible by pushing down
on the Child Restraint System
whilst feeding the shoulder belt
back into the retractor.
4. Push and pull on the Child
Restraint System to confirm that
the seat belt is holding it firmly in
place.
To Next Page
Loading...
