73
5
5
Driving your vehicle Brake system
AUTO HOLD (if equipped)
The Auto Hold is designed to main
-
tain the vehicle in a standstill even
though the brake pedal is not
pressed after the driver brings the
vehicle to a complete stop by press
-
ing the brake pedal.
Applying Auto Hold function
1. Press the brake pedal and start
the vehicle.
2. Press the Auto Hold button. The
white AUTO HOLD indicator will
come on indicating the system is
in standby.
Before the Auto Hold will engage,
the driver's door, tailgate and
engine bonnet must be closed.
When coming to a complete stop by
pressing the brake pedal, the AUTO
HOLD indicator changes from white
to green indicating the AUTO HOLD
is engaged. The vehicle will remain
at a standstill even if you release
the brake pedal.
If EPB is applied, Auto Hold will be
released.
If you press the accelerator pedal
with the gear in D (Drive), R
(Reverse) or Manual mode, the Auto
Hold will be released automatically
and the vehicle will start to move.
The indicator changes from green to
white indicating the Auto Hold is in
standby and the EPB is released.
When driving off from Auto Hold by
pressing the accelerator pedal,
always check the surrounding area
near your vehicle.
Slowly press the accelerator pedal
for a smooth launch.
To Next Page
Loading...
