Features of your vehicle
1304
Lighting
ON position to turn on the head
-
lights.
Auto light
When the light switch is in the AUTO
light position, the taillights and
headlights will turn ON or OFF auto
-
matically depending on the amount
of light outside the vehicle.
䳜 Never place anything over the
sensor (1) located on the instru
-
ment panel as this will ensure
better auto-light system control.
䳜 Don't clean the sensor using a
window cleaner, the cleaner may
leave a light film which could
interfere with sensor operation.
䳜 If your vehicle has window tint or
other types of metallic coating on
the front windscreen, the Auto
light system may not work prop
-
erly.
Operating high beam
To turn on the high beam headlamp:
䳜 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams
are switched on.
Do not use high beam when there
are other vehicles. Using high beam
could obstruct the other driver's
vision.
To Next Page
Loading...
