71
7
7
Maintenance Fuses
Fuses
Blade type
Cartridge type
Multi fuse
BFT
* Left side: Normal, Right side:
Blown
* The actual fuse/relay panel label
may differ from equipped items.
A vehicle's electrical system is pro
-
tected from electrical overload
damage by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver's side panel
bolster, the others in the engine
compartment near the battery.
If any of your vehicle's lights, acces
-
sories, or controls do not work,
check the appropriate circuit fuse. If
a fuse has blown, the element inside
the fuse will melt.
If the electrical system does not
work, first check the driver's side
fuse panel.
Before replacing a blown fuse, dis
-
connect the negative battery cable.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved and
immediately consult a professional
workshop. Kia recommends to con
-
sult an authorised Kia dealer/service
partner.
Three kinds of fuses are used: blade
type for lower amperage rating,
cartridge type, and multi fuse for
higher amperage ratings.
To Next Page
Loading...
