91
7
7
Maintenance Light bulbs
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assem
-
bly and turn the socket clockwise.
6. Connect the negative terminal
from the battery.
Replacing front fog lamp (LED type)
If the front fog lamp (6) does not
operate, have your vehicle checked
by a professional workshop. Kia rec
-
ommends to visit an authorised Kia
dealer/service partner.
Replacing side repeater lamp (LED
type)
If the Side repeater lamp (LED) (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
The LED lamp cannot be replaced as
a single unit because it is an inte
-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the Side repeater lamp (LED),
for it may damage related parts of
the vehicle.
Replacing stop and tail lamp (Bulb
type)
1. Open the tailgate.
2. Open the service cover.
3. Loosen the light assembly retain
-
ing screws with a cross-tip screw
driver.
To Next Page
Loading...
