Safety features of your vehicle
423
ISOFIX anchorage and top-tether anchorage
(ISOFIX anchorage system) for children
Securing a Child Restraint System
seat with "Top-tether Anchorage"
system (if equipped)
Type A
Type B
Child Restraint hook holders are
located on the seat back.
1. Route the Child Restraint System
seat strap over the seatback.
For vehicles with adjustable head
-
rest, route the tether strap under
the headrest and between the
headrest posts, otherwise route
the tether strap over the top of
the seatback.
2. Connect the top-tether to the
top-tether anchorage, then
tighten the top-tether according
to the instructions of your Child
Restraint System's manufacturer
to firmly attach the Child
Restraint System to the seat.
Take the following precautions
when installing the top-tether:
䳜 Read and follow all installation
instructions provided with your
Child Restraint System.
䳜 NEVER attach more than one
Child Restraint System to a single
ISOFIX top-tether anchorage. This
could cause the anchorage or
To Next Page
Loading...
