Features of your vehicle
1204
Reverse Parking Distance Warning (PDW)
-Sharp or slim objects, such as
ropes, chains or small poles
- Objects, which tend to absorb
sensor frequency, such as
clothes, spongy material or
snow
- Objects smaller than 1 m (40
in.) in length and narrower than
14 cm (6 in.) in diameter
Function settings
Turning On/Off
䳜 Press the Park Safety ( ) but
-
ton to turn on Reverse Parking
Distance Warning. Press the but
-
ton again to turn off the function.
䳜 With the ENGINE START/STOP
button in the ON position, if
'Driver Assistance → Parking
Safety → Parking Distance Warn
-
ing Auto On' is selected from the
Settings menu, the Parking
Safety ( ) button indicator
light will illuminate. The function
will operate when vehicle speed is
below 10 km/h (6 mph).
If vehicle speed is above 10 km/h
(6 mph), the function will not
warn the driver even though
objects are detected.
Warning volume
With the ENGINE START/STOP but
-
ton in the ON position, select 'Driver
Assistance → Warning Volume' from
the Settings menu to change the
warning volume to 'High', 'Medium',
'Low' or 'Off' for Reverse Parking
Distance Warning.
However, even if 'Off' is selected,
the system volume will not turn off
but the volume will sound as 'Low'.
If you change the warning volume,
the warning volume of other Driver
Assistance systems may change.
To Next Page
Loading...
