97
7
7
Maintenance Light bulbs
Replacing room lamp (LED type)
Prior to working on the Interior
lamps, ensure that the "OFF" button
is depressed to avoid burning your
fingers or receiving an electric
shock.
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Replacing personal lamp (LED type)
(if equipped)
If the personal lamp (LED) (1) does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
The LED lamp cannot be replaced as
a single unit because it is an inte
-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the personal lamp (LED), for it
may damage related parts of the
vehicle.
To Next Page
Loading...
