Kia Sorento 2021 - Function Settings

139
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
though the warning message
does not appear on the cluster,
Blind-Spot Safety system may
not operate properly. Have the
function be inspected by an
authorised Kia dealer.
䳜 If the rear corner radars have
been replaced or repaired, Have
the vehicle be inspected by an
authorised Kia dealer.
䳜 Use only genuine Kia parts to
repair the rear bumper where the
rear corner radar is located.
䳜 Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard
near the rear corner radar.
䳜 The function may not work prop
-
erly if the bumper has been
replaced, or the surroundings of
the rear corner radar has been
damaged or paint has been
applied.
䳜 If a trailer, carrier, etc. is installed,
it may adversely affect the per
-
formance of the rear corner radar
or the function may not operate.
CAUTION
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA) (Sensor fusion) (if equipped)"
on page 5-115.
Function settings
Setting
Blind-Spot Safety
With the ENGINE START/STOP but -
ton in the ON position, select or
deselect 'Driver Assistance → Blind-
Spot Safety' from the Settings
menu to set whether or not to use
each function.
䳜 If 'Active Assist' is selected, the
function will warn the driver with
a warning message, an audible
warning, steering wheel vibration
and braking assist will be applied
depending on the collision risk lev
-
els.
䳜 If 'Warning Only' is selected, the
function will warn the driver with
a warning message, an audible
warning and steering wheel vibra
-
tion depending on the collision risk
levels. Braking will not be assisted.
䳜 If 'Off' is selected, the function will
turn off.
OMQ4AH050349