111
4
4
Features of your vehicle Rear View Monitor (RVM)
Detecting sensor
Rear view camera
Refer to the picture above for the
detailed location of the detecting
sensor.
The image shown on the screen
may differ from the actual distance
of the object. Make sure to directly
check the vehicle's surroundings for
safety.
Always keep the rear view camera
lens clean. If the lens is covered with
foreign material, it may adversely
affect camera performance and
Rear View Monitor may not operate
normally.
Function settings
Setting
䳜 You can change Rear View Moni
-
tor settings by pressing the setup
icon ( ) on the screen whilst the
function is operating, or select
'Driver Assistance → Parking
Safety → Camera Settings' from
the Settings menu whilst the
ENGINE START/STOP button is in
the ON position.
䳜 Parking assist rear view settings
can be changed in the display
information and the screen
brightness/contrast value can be
changed in the screen settings.
䳜 Select 'Setting → Screen → Keep
Rear Camera' from the Settings
menu of the Infotainment system
to use the Keep Rear Camera
function.
To Next Page
Loading...
