Maintenance
907
Light bulbs
Replacing headlamp (Low beam /
High beam), position lamp / day
-
time running lamp, turn signal lamp
(LED type)
Type A
Type B
If the head lamp LED (1,2), daytime
running lamp LED (3) and turn signal
lamp LED (4) does not operate, have
your vehicle checked by a profes
-
sional workshop. Kia recommends to
visit an authorised Kia dealer/ser
-
vice partner.
Replacing front turn signal lamp
(Bulb type)
1. Disconnect the negative terminal
from the battery.
2. Remove the socket (A) from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Remove the bulb (B) from the
socket (A) by pressing it in and
rotating it counterclockwise until
the tabs on the bulb align with the
slots in the socket. Pull the bulb
out of the socket
4. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.