Maintenance
727
Fuses
Fuse replacement
䳜 Never replace a fuse with any
-
thing but another fuse of the
same rating.
䳜 A higher capacity fuse could cause
damage and possibly a fire.
䳜 Never install a wire or aluminium
foil instead of the proper fuse
even as a temporary repair. It
may cause extensive wiring dam
-
age and a possible fire.
䳜 Do not arbitrarily modify or add-
on electric wiring of the vehicle.
Do not use a screwdriver or any
other metal object to remove fuses
because it may cause a short circuit
and damage the system.
䳜 When replacing fuse, turn the
ignition "OFF" and turn off
switches of all electrical devices
then remove battery (-) terminal.
䳜 The actual fuse/relay panel label
may differ from equipped items.
䳜 When replacing a blown fuse or
relay with a new one, make sure
the new fuse or relay fits tightly
into the clips. The incomplete fas
-
tening fuse or relay may cause
the vehicle wiring and electric sys
-
tems damage and a possible fire.
䳜 Do not remove fuses, relays and
terminals fastened with bolts or
nuts. The fuses, relays and termi
-
nals may be fastened incom
-
pletely, and it may cause a
possible fire. If fuses, relays and
terminals fastened with bolts or
nuts are blown, consult a profes
-
sional workshop. Kia recom
-
mends to consult an authorised
Kia dealer/service partner.
䳜 Do not input any other objects
except fuses or relays into fuse/
relay terminals such as a driver or
wiring. It may cause contact fail
-
ure and system malfunction.
䳜 Do not plug in screwdrivers or
aftermarket wiring into the ter
-
minal originally designed for fuse
and relays only. The electrical
system and wiring of the vehicle
interior may be damaged or
burned due to contact failure.
䳜 If you directly connect the wire on
the taillight or replace the bulb
which is over the regulated capac
-
ity to install trailers etc., the inner
junction block can get burned.
To Next Page
Loading...
