67
4
4
Features of your vehicle Mirrors
5. It is initialised when the shift dial
is changed to a position other
than R (Reverse), or the rearview
mirror selector lever is changed to
the neutral position. (Initialised
position will be applied from next
operation)
6. You can initialise settings for the
mirror on the other side by fol
-
lowing the same procedures (1-
5).
We recommend following the proce
-
dures in an orderly manner to
change or initialise the auto revers
-
ing user settings.
If you move to the next step before
completing the previous one, the
changed angle may not be changed
or initialization may not work prop
-
erly
To Next Page
Loading...
