Driving your vehicle
185
ENGINE START/STOP button
䳜 Do not press the ENGINE START/
STOP button for more than 10
seconds except when the stop
lamp fuse is blown.
䳜 Do not turn the ignition switch to
the START position with the
engine running. It may damage
the starter.
You can also start the engine when
the gear is in the N (neutral) posi
-
tion, but for safety, be sure to start
the engine only when the gear is in
the P (Park) position.
Starting the petrol engine
1. Carry the smart key or leave it
inside the vehicle.
2. Make sure the parking brake is
firmly applied.
3. Make sure the gear is shifted to P
(Park) position. Depress the brake
pedal fully.
4. Press the ENGINE START/STOP
button.
It should be started without
depressing the accelerator pedal.
5. Do not wait for the engine to
warm up whilst the vehicle
remains stationary. Start driving
at moderate engine speeds.
(Steep accelerating and deceler
-
ating should be avoided.)
Starting the diesel engine
To start the diesel engine when the
engine is cold, it has to be pre-
heated before starting the engine
and then have to be warmed up
before starting to drive.
1. Make sure the parking brake is
applied.
2. Make sure the gear is shifted to P
(Park) position. Depress the brake
pedal fully.
Glow indicator light
3. Press the ENGINE START/STOP
button whilst depressing the
brake pedal.
4. Continue depressing the brake
pedal until the illuminated glow
indicator goes off. (approxi
-
mately 5 seconds)
5. The engine starts running when
the glow indicator goes off.
䳜 Recommend to wait for the diesel
engine to warm up whilst the
vehicle remains stationary in win
-
ter for a whilst and drive.
䳜 Recommend to use diesel fuel in a
high altitude mountain or country
where you visit in winter.
To Next Page
Loading...
