9
3
3
Safety features of your vehicle Seat
2. Release the switch once the seat
reaches the desired position.
Reclining seatback
To recline the seatback:
1. Push the control switch forward
or rearward to move the seatback
to the desired angle.
2. Release the switch once the seat
reaches the desired position.
Changing seat cushion tilt and
height
To change the height of the seat:
1. Pull the front portion of the con
-
trol switch up to raise or press
down to lower the front part of
the seat cushion.
Pull the rear portion of the control
switch up to raise or press down
to lower the seat cushion.
2. Release the switch once the seat
reaches the desired position.
Adjusting lumbar support (if
equipped)
Type A
Type B
To Next Page
Loading...
