47
5
5
Driving your vehicle Dual clutch transmission (Dial SBW)
In N (Neutral), if the driver attempts
to turn off the vehicle, the vehicle is
turned OFF and shifted to the P
(Park) position automatically.
D (Drive)
This is the normal driving position.
To shift to D (Drive), move the dial
SBW to the D (Drive) position whilst
depressing the brake pedal.
In D (Drive), if the driver attempts to
turn off the vehicle, the vehicle is
turned OFF and shifted to the P
(Park) position automatically.
Stay in N (Neutral) position when
vehicle is Off
If you want to keep the N (Neutral)
position after the vehicle is OFF, do
the following.
1. Deactivate the AUTO HOLD and
release the parking brake when
the ENGINE START/STOP button
is ON.
2. Turn the dial SBW to the N (Neu
-
tral) position by depressing the
brake pedal. If the message
("Press and hold OK button to
stay in Neutral when vehicle is
Off") appears on the cluster LCD
display, press and hold the OK
button on the steering wheel for
more than 1 second. After the
message is disappeared, the vehi
-
cle cannot keep the N position
when the vehicle is off.
3. Turn off the engine after the
message ("Vehicle will stay in (N).
Change gear to cancel") appears
on the cluster LCD display.
In this situation, if you unfasten the
driver's seat belt and open the
driver's door within 3 minutes, the
gear shifts to P (Park) position and
the ENGINE START/STOP button is
turned off.
To Next Page
Loading...
