Driving your vehicle
1425
Blind-Spot Collision-Avoidance Assist (BCA)
warning will operate when your
vehicle approaches the lane the
blind spot vehicle is detected.
䳜 To warn the driver of a collision,
the warning light on the side view
mirror and head-up display (if
equipped) will blink. At the same
time, an audible warning will
sound and the steering wheel will
vibrate.
䳜 When the turn signal is turned
off, the collision warning will be
cancelled and the function will
return to vehicle detection state.
䳜 The detecting range of the rear
corner radar is determined by a
standard road width, therefore,
on a narrow road, the function
may detect other vehicles in the
next lane and warn you. In con
-
trast, on a wide road, the function
may not be able to detect a vehi
-
cle driving in the next lane and
may not warn you.
䳜 When the hazard warning flasher
is on, the collision warning by the
turn signal will not operate.
If the driver's seat is on the left side,
the collision warning may occur
when you turn left. Maintain a
proper distance with the vehicles in
the left lane. If the driver's seat is on
the right side, the collision warning
may occur when you turn right.
Maintain a proper distance with the
vehicles in the right lane.
Collision-Avoidance Assist (whilst
driving)
䳜 To warn the driver of a collision,
the warning light on the side view
mirror will blink and a warning
message will appear on the clus
-
ter. At the same time, an audible
warning will sound, warning light
on the head-up display (if
equipped) will blink and the steer
-
ing wheel will vibrate.
䳜 The function will operate when
your vehicle speed is between 60
~ 200 km/h (40 ~ 120 mph) and
both lane markings of the driving
lane are detected.
䳜 Emergency braking will be
assisted to help prevent collision
with the vehicle in the blind spot
area.
To Next Page
Loading...
