145
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
Malfunction and limitations
Malfunction
When Blind-Spot Safety system is
not working properly, the 'Check
Blind-Spot Safety system' warning
message will appear on the cluster,
and the function will turn off auto
-
matically or the function will be lim
-
ited. Have the function be inspected
by an authorised Kia dealer.
When the side view mirror warning
light is not working properly, the
'Check side view mirror warning
light' warning message will appear
on the cluster. Have the function be
inspected by an authorised Kia
dealer.
Function disabled
When the rear bumper around the
rear corner radar or sensor is cov
-
ered with foreign material, such as
snow or rain, or installing a trailer or
carrier, it can reduce the detecting
performance and temporarily limit
or disable Blind-Spot Safety sys
-
tem.
If this occurs, the 'Blind-Spot Safety
Function disabled. Radar blocked'
warning message will appear on the
cluster.
The function will operate normally
when such foreign material or
trailer, etc. is removed, and then the
engine is restarted.
If the function does not operate
normally after it is removed, have
the function be inspected by an
authorised Kia dealer.
To Next Page
Loading...
