33
6
6
What to do in an emergency If you have a flat tyre (with tyre mobility kit)
ing vehicles aware of your loca
-
tion.
䳜 To be sure your vehicle will not
move, even when you're on fairly
level ground, always set your
parking brake.
䳜 Only use the TMK for sealing/
inflation passenger car tyres. Do
not use on motorcycles, bicycles
or any other type of tyres.
䳜 Do not remove any foreign
objects-such as nails or screws -
that have penetrated the tyre.
䳜 Before using the TMK, read the
precautionary advice printed on
the sealant bottle!
䳜 Provided the car is outdoors,
leave the engine running. Other
-
wise operating the compressor
may eventually drain the car bat
-
tery.
䳜 Never leave the TMK unattended
whilst it is being used.
䳜 Do not leave the compressor run
-
ning for more than 10 min. at a
time or it may overheat.
䳜 Do not use the TMK if the ambi
-
ent temperature is below -30C (-
22F).
䳜 When the tyre and wheel are
damaged, do not use Tyre Mobil
-
ity Kit for your safety.
Technical Data
䳜 System voltage: DC 12 V
䳜 Working voltage: DC 12 V
䳜 Amperage rating: max. 15 A
䳜 Suitable for use at temperatures:
-30 to 70 C (-22 to 158 F)
䳜 Max. working pressure: 7 bar (101
psi)
䳜 Size
- Compressor: 150 x 130 x 60
mm (5.9 x 5.1 x 2.4 in.)
- Sealant bottle: 115.3 x 87.3
mm (4.5 x 3.4 in.)
- Compressor weight: 620 g (1.36
lbs)
- Sealant volume: 400 ml (24.4
cu. in.)
* Sealant and spare parts can be
obtained and replaced at an
authorised vehicle or tyre dealer.
Empty sealant bottles may be dis
-
posed of at home. Liquid residue
from the sealant should be dis
-
posed of by your vehicle or tyre
dealer or in accordance with local
waste disposal regulations.
To Next Page
Loading...
