45
6
6
What to do in an emergency Pan-European eCall system
The driver or passenger manually
can make an emergency call in the
Public Safety Answering Point
(PSAP), by pressing SOS button to
call the necessary emergency ser
-
vices.
A call to the emergency services
through the Pan-European eCall
system can be canceled by pressing
the SOS button again only before
the call connection.
After activation of emergency call in
the manual mode (for proper emer
-
gency services and support), the
Pan-European eCall system auto
-
matically transmits the road acci
-
dent data / or data on other
accident to the officer of the Public
Safety Answering Point (PSAP)
(during emergency call) by pressing
the SOS button.
If the driver or passenger acciden
-
tally presses the SOS button, it can
be canceled by pressing the button
again in 3 seconds. It can䳓t be can
-
celed after that.
In case of road accident or other
accident for activation of emer
-
gency call in manual mode it is nec
-
essary:
1. Stop the car in accordance with
traffic rules to ensure safety to
yourself and other participants of
road traffic;
2. Press the SOS button, when
pressing the button SOS registra
-
tion of the device in the wireless
telephonic communication net
-
works is carried out, minimum
data set about car and its location
is collected in accordance with of
the technical requirements of the
device.
After that connection with the
officer of the Pan-European eCall
system is made for clearing up
reasons (conditions) of the emer
-
gency call.
3. After clearing up reasons of the
emergency call, the officer of the
Public Safety Answering Point
(PSAP) sends emergency services
and completes the emergency
call.
If the emergency call is not carried
out in accordance with the proce
-
dure, mentioned above, the emer
-
gency call will be considered as
erroneous.
Emergency power supply of the
Pan-European eCall system from
the battery
䳜 The Pan-European eCall system
battery supplies power during 1
hour in case main power source of
the vehicle is cut off due to the
3