PLZ-4W Basic Operation 5-21
4. Select Function.
Press the or CURSOR key several times until Function is highlighted on
the menu.
When highlighted, press the ENTER key.
5.
Select soft start time.
Check that the cursor is blinking by Soft Start on the menu, and turn the rotary
knob to select the soft start time.
6.
Exit from the menu.
Press the MENU (SHIFT + SET/VSET) key.
The display returns to the basic setting entry condition (the characters
“SET” is highlighted).
The soft start time is set.
Setu
p
1. Function
2. Protect Action
4. Cut Off
5. Res
p
onse
PREV NEXT
3. Memor
y
Function
Count Time :
OFF
PREV
Soft Start :
1ms
To Next Page
Loading...
