6-4 Applied Operation PLZ-4W
3. Select Setup.
Press the or CURSOR key several times until Setup is highlighted on the
menu. When highlighted, press the ENTER key.
4.
Select Memory.
Press the or CURSOR key several times until Memory is highlighted on
the menu. When highlighted, press the ENTER key.
5.
Select the recall method of ABC preset memories.
Turn the rotary knob to the right to display SAFETY and left to display
DIRECT. To switch to the direct method, select DIRECT.
6.
Exit from the menu.
Press the MENU (SHIFT+SET/VSET) key.
The recall method of ABC preset memories are set.
■ Recalling ABC preset memories (SAFETY)
1. Select the memory.
Set the operation mode and range according to the memory to be recalled.
Next, press the key (A, B, or C) to be recalled.
The pressed key illuminates, and the settings stored to the memory are
shown on the display.
2.
Recall the memory.
To recall the memory, press the ENTER key.
To change to another memory, press the desired key (A, B, or C), check the set-
tings, and press the ENTER key.
The settings are applied when you press the ENTER key.
■ Recalling ABC preset memories (DIRECT)
1. Recall the memory.
Set the operation mode and range according to the memory to be recalled.
2.
Press the key (A, B, or C) to be recalled.
The pressed key illuminates, and the current settings are changed to the
settings that were stored.
To Next Page
Loading...
