Kinco SV100 Series User Manual

Preface
Thank you for using SV100 series Variable Frequency Drive made by Kinco Automation.
SV100 satisfies the high performance requirements by using a unique control method to achieve high torque, high
accuracy and wide speed-adjusting range. Its anti-tripping function and capabilities of adapting to severe power
network, temperature, humidity and dusty environment exceed those of similar product made by other companies,
which improves the product’s reliability noticeably;
SV100 use modularization design, in the premise of satisfying the demand of customer, we also can satisfy
customer’s personalized and industrization demand by expansion design, and this fit the trend of VFD development.
Without PG connector, strong speed control, flexiable input/output terminal, pulse frequency setting, saving parameters
at power outage and stop, frequency setting channel, master and slave frequency control and so on, all these satisfy
various of high accuracy and complex drive command, at the same time we provide the OEM customer high
integration total solution, it values highly in system cost saving and improving the system reliability.
SV100 can satisfy the customers’ requirements on low noise and EMI by using optimized PWM technology and
EMC design.
This manual provides information on installation, wiring, parameters setting, trouble-shooting, and daily
maintenance. To ensure the correct installation and operation of SV100, please read this manual carefully before
starting the drive and keep it in a proper place and to the right person.
Unpacking Inspection Note
Upon unpacking, please check for:
 Any damage occurred during transportation;
 Check whether the rated values on the nameplate of the drive are in accordance with your order.
Our product is manufactured and packed at factory with great care. If there is any error, please contact us or
distributors.
The user manual is subject to change without notifying the customers due to the continuous process of product
improvements
VFD model rule
SV 1 00 – 4 T– XXXX G–U–000
Reserved
VFD code
SV： open loop
FV：Closed loop
Communication port：
U：None
L RS485
A CAN
P profibus
The first gerneration
Power
0004： 0.4kw
0007： 0.75kw
……
Power supply
2： 200V
4： 400V
43：460V
00：Standard model
S： signal phase
T： 3-phase
43：460V
G： Constant torque
L： Constant power
43：460V

Kinco SV100 Series Specifications

General

Brand	Kinco
Model	SV100 Series
Category	DC Drives
Language	English