KitchenAid KUWS24LSBS - Remove the Tracks (UW, BC)

4-2
REMOVE THE TRACKS (UW, BC)
To remove the tracks, lift the front end of the
track and pull the hooked end out of the slot
in the wall.
Lift the back of the track and pull to release
the hooks on the track from the slots in the
back of the unit. Remove the track from the
unit.
1.
2.
Lay the tracks in order of removal to assist in
reassembly. There are two different tracks
for different positions in the unit, and the
tracks from the left side and right side are
different. Make sure that the track with the
narrow spacing is installed in the lowest posi-
tion of the unit.
3.
Narrow
Wide
Slot
Hook
Hook